Get a quote

Free tool

Thermal camera field of view and spot size calculator

Resolution alone does not say what a thermal camera can measure: the lens and the distance do too. Pick the sensor, the lens angle and the distance to see the view, the pixel size and the smallest spot it reads reliably.

Thermal camera FOV and spot sizeView, IFOV, pixel size and the smallest spot
Updates
AS YOU TYPE

THE VIEWROUGH, NOT TO SCALE

View at that distance
-
IFOV
-
One pixel covers
-
Smallest spot measured (3 x 3 px)
-
Furthest to measure the target
-
Target
-

View = 2 x distance x tan(FOV / 2). IFOV = FOV in radians / horizontal pixels. 3 x 3 pixels is a common rule of thumb for a reliable spot reading; some makers quote a measurement IFOV of their own.

Pick the sensor resolution, the lens angle, the distance and the size of what you want to measure: the calculator gives the camera's view, the IFOV, the patch one pixel covers, the smallest spot it measures and the furthest you can stand.

Field of view, IFOV and spot size

The field of view (FOV) is the angle the lens takes in, usually given as horizontal by vertical degrees, such as 45° x 34°. Spread over the sensor's columns, it gives the IFOV (instantaneous field of view): the angle one pixel sees, in milliradians. At 1 m, 1 mrad is 1 mm, so a camera with an IFOV of 4.9 mrad has pixels that cover about 5 mm at 1 m and 15 mm at 3 m. A single pixel only shows that something is there. To measure it, a common rule of thumb is that the target should cover at least 3 x 3 pixels, so the smallest reliable spot is about three times the pixel size.

IFOV by resolution and lens

Resolution56° lens45° lens25° lens12° lens6° lens
80 x 6012.22 mrad9.82 mrad5.45 mrad2.62 mrad1.31 mrad
160 x 1206.11 mrad4.91 mrad2.73 mrad1.31 mrad0.65 mrad
256 x 1923.82 mrad3.07 mrad1.70 mrad0.82 mrad0.41 mrad
320 x 2403.05 mrad2.45 mrad1.36 mrad0.65 mrad0.33 mrad
384 x 2882.55 mrad2.05 mrad1.14 mrad0.55 mrad0.27 mrad
640 x 4801.53 mrad1.23 mrad0.68 mrad0.33 mrad0.16 mrad
640 x 5121.53 mrad1.23 mrad0.68 mrad0.33 mrad0.16 mrad

Multiply the IFOV by the distance in metres for the millimetres one pixel covers, and by 3 for the smallest spot it measures. A narrow lens on a modest sensor can out-measure a high-resolution camera with a wide lens at a distance, which is why switchyard, roof and drone work often use telephoto lenses. See thermal imaging cameras and thermal drone cameras.

What it means for inspections

For electrical work, safety distances decide how close you can get to a live board or an overhead line, so work out the spot at that distance before choosing a camera. For buildings, a wide lens shows a whole wall from inside a room. For solar farms from a drone, the height sets the pixel size on the panel, and the inspection standard may ask for a minimum pixel count per cell. If you only need a camera for one survey, hire one with the right lens, or ask a thermographer.

Frequently asked questions

What is IFOV on a thermal camera?
The instantaneous field of view: the angle one pixel sees, in milliradians. 1 mrad covers 1 mm at 1 m, so the IFOV times the distance gives the size of a pixel on the target.
How is the field of view calculated?
Width = 2 x distance x tan(horizontal FOV / 2). A 45° lens at 3 m sees about 2.5 m across. The height comes from the vertical FOV in the same way.
Why can my camera see a hot spot but not measure it?
If the hot spot covers less than about 3 x 3 pixels, each pixel averages it with the cooler surroundings, so the reading is too low even though the spot shows on screen. Get closer or use a narrower lens.
Does a higher resolution always help?
More pixels cover the same view with smaller pixels, so yes for the same lens. But a narrow lens on a 160 x 120 sensor can resolve a far target better than a wide lens on a 320 x 240 sensor. Compare the IFOV, not just the pixel count.

Other free tools

Free quote request, no obligation

Request quotes for thermal imaging cameras

Describe it the way a technician would: how far away you stand and how big the target is, or the camera and the distance, or simply how many. The planner draws the measuring cone or the camera's view as you type. Suppliers and service companies in your area quote you directly.

Measurement sheet and quote requestThermal Imaging Cameras
Req
45583
Date
2026-11-20
Cost
FREE

1The job

2The camera and the distance (optional, it helps the quote)

CAMERA VIEWROUGH, NOT TO SCALE

-
-
-
-
-
-
Estimate
-

Plain geometry for the request, not a measurement.

3Where you are now

4Your list (optional)

  1. 01
  2. 02
Up to 12 lines: instruments, probes, certificates or services.
Needs and options

5Your details

Free and no obligation. By sending you agree that we may share your request with suitable suppliers and service companies. See our privacy policy.

Get a free quote