Loose lugs, overloaded circuits and failing breakers get hot long before they fail. Infrared thermography of your electrical installation uses a thermal camera to find that heat while the boards are working under normal load, so the fault can be fixed in a planned shutdown instead of after a burnt-out DB board or a fire. Thermographers survey distribution boards, MCCs, transformers, switchgear, cables, motors and solar PV systems, and hand you a report with a priority for each fault. Send one request and independent thermographers who work in your area quote you directly.
What a survey covers
A typical survey walks the site board by board: main and sub distribution boards, motor control centres, switchgear, transformers, capacitor banks, busbars, cable terminations and UPS rooms. Many also include motors and bearings, and solar PV inverters, combiner boxes and panels. The thermographer looks for connections hotter than their neighbours, phases that run unevenly and parts hotter than they should be for the load. Tell them how many boards you have and where, because the price follows the number of boards and sites and the travel, not the floor area.
Why it has to be done under load
A loose connection only heats up when current flows through it, so a survey on a quiet Sunday with everything switched off finds very little. Surveys are done during normal working hours, ideally when the load is near its usual peak. The board covers have to be opened so the camera can see the parts, because glass and most clear covers block infrared. Opening live panels is done by or with an authorised person under your site's safety rules, in the right protective clothing. Arrange that person before the day, or the survey stalls at the first locked panel.
What the report should give you
Each fault should have a thermal picture and a normal photo of the same spot, the board name and location, the temperature, the rise above a similar part or the ambient, the load at the time if it was measured, and a priority such as repair now, repair soon or monitor. Good reports also list the boards checked with no faults, so you can show the whole site was covered. Your electrician then fixes the faults, and a follow-up scan confirms the repair. Ask to see a sample report before you choose.
Insurers, intervals and who does the work
Insurers commonly ask commercial and industrial clients for a yearly thermographic survey of the electrical installation, and some want proof that the faults were repaired. Check your own policy wording. Thermographers are usually trained and certified at Level 1, 2 or 3 (see thermography training), and you can ask to see the certificate. Some sites buy their own thermal camera or hire one for checks between surveys, but the yearly report is often best done by an independent thermographer.
What to put in your request
- The number of boards, MCCs and transformers
- The number of buildings or sites, and the addresses
- Whether motors, cables or solar PV are included
- Who will open the panels, and the site safety rules
- Whether the report is for your insurer, and by when
Electrical Thermography Surveys for industry, food, health, labs and homes
- Factories, mines and plants: a yearly scan of MCCs, switchgear, transformers and motors under production load
- Kitchens, butcheries and food factories: boards, compressors and cold room plant scanned before a breakdown spoils stock
- Hospitals, clinics and pharmacies: hospital and clinic boards, UPS rooms and standby supplies checked under load
- Electricians, HVAC and refrigeration technicians: electricians adding a thermal scan before and after their repairs
- Labs, schools and universities: lab and server room boards and UPS systems scanned for overheating
- Cold stores and distributors: refrigeration plant boards and compressor motors scanned at peak summer load
- Farms, poultry houses and packhouses: pump, irrigation and packhouse boards scanned before the busy season
- Households and families: a scan of a hot or buzzing DB board before an electrician opens it up
- Property managers, inspectors and security: yearly scans of malls, office parks and estates for the insurer
Frequently asked questions
Does a thermal survey replace an electrical certificate of compliance?
Will the power need to be switched off?
How long does a survey take?
Do you do thermal surveys yourselves?
Electrical Thermography Surveys by province and city
- Johannesburg
- Pretoria
- Centurion
- Midrand
- Sandton
- Randburg
- Roodepoort
- Krugersdorp
- Randfontein
- Germiston
- Boksburg
- Benoni
- Kempton Park
- Alberton
- Vanderbijlpark
- Vereeniging
- Durban
- Pinetown
- Pietermaritzburg
- Richards Bay
- Newcastle
- Ladysmith
- Gqeberha (Port Elizabeth)
- East London
- Kariega (Uitenhage)
- Mthatha
- Cape Town
- Bellville
- Paarl
- Stellenbosch
- George
- Worcester
- eMalahleni (Witbank)
- Middelburg
- Secunda
- Mbombela (Nelspruit)
- Rustenburg
- Brits
- Klerksdorp
- Potchefstroom
- Mahikeng
- Polokwane
- Tzaneen
- Kimberley
- Upington
- Bloemfontein
- Welkom
- Sasolburg
