A thermometer that will not switch on, a cracked probe cable or a thermal camera that went into a puddle is not always the end of it. Repair shops and service centres fix battery contacts, probes and cables, buttons, screens, laser pointers, and the lenses and housings on thermal cameras. Thermal imaging camera repair, and repairs to good industrial thermometers, loggers and process sensors, are usually worth it; a cheap gun or kitchen probe often costs less to replace. This page helps you decide. Send one request and independent repairers quote you directly.
Common faults, and what to try first
Many dead thermometers just need batteries. Clean any corrosion off the contacts with a cotton bud and a little isopropyl alcohol, and fit fresh batteries of the right type. Error codes on ear thermometers, such as a position error, often mean the probe was not placed properly, the lens is dirty or the room is too hot or cold: the manual lists them. A gun carried from a cold room into a hot kitchen also reads wrong until it settles. Other common faults are a probe broken at the cable joint, a sticky button, a faded display, a dead laser and water inside after wash-down.
Repair or replace?
Compare the repair quote with the cost of a new instrument of the same quality, and remember the repaired one needs a new calibration. Cheap guns, stick thermometers and kitchen probes are rarely worth fixing beyond a battery or a new probe. Thermal cameras, pyrometers, multi-channel loggers, reference thermometers, fixed infrared sensors and PT100 probes with transmitters usually are. So are instruments with years of calibration history behind them. If a model is old, ask whether parts are still available before you send it.
Thermal camera repairs
Thermal cameras are repaired for cracked or scratched lenses, damaged housings, broken screens and buttons, battery and charging faults, water damage and firmware problems. Some faults need the maker's authorised service centre, which can mean sending the camera overseas and waiting; others can be handled locally. Ask whether the detector is affected, because that is the costly part. After a lens or detector repair, the camera should be checked against a blackbody before you rely on its temperatures again.
Getting a quote and getting it back
Ask for a written quote before work starts, and whether there is an assessment fee if you decide not to go ahead. Ask about the turnaround, parts that must be ordered in, and the warranty on the repair. Send the instrument with its probes, cables and charger, and a note of the fault and when it happens. Always ask for a calibration after a repair, with a certificate if you are audited. If you need cover while it is away, hire a camera or keep a spare.
What to put in your request
- What the instrument is and roughly how old it is
- The fault, when it happens and any error shown
- Whether it was dropped, got wet or overheated
- Whether you need a calibration certificate after
- How soon you need it back, and if you need a loan unit
Thermometer and Thermal Camera Repairs for industry, food, health, labs and homes
- Factories, mines and plants: pyrometers, fixed sensors and process probes repaired instead of replaced
- Kitchens, butcheries and food factories: kitchen and factory probes re-cabled and sealed for wash-down
- Hospitals, clinics and pharmacies: ear and clinical thermometers checked when they show errors or drift
- Electricians, HVAC and refrigeration technicians: a dropped thermal camera or temperature gun repaired so work can carry on
- Labs, schools and universities: reference thermometers and multi-channel loggers repaired and recalibrated
- Cold stores and distributors: data loggers and alarm sensors given new batteries, seals and probes
- Farms, poultry houses and packhouses: incubator, dairy and poultry house sensors repaired before the season
- Households and families: a good cooking or baby thermometer given new batteries or a new probe
- Property managers, inspectors and security: building management sensors and inspection cameras kept working
Frequently asked questions
Can thermometer batteries be replaced?
Is a water-damaged thermal camera worth repairing?
Does a repaired instrument need recalibrating?
Do you repair instruments yourselves?
Thermometer and Thermal Camera Repairs by province and city
- Johannesburg
- Pretoria
- Centurion
- Midrand
- Sandton
- Randburg
- Roodepoort
- Krugersdorp
- Randfontein
- Germiston
- Boksburg
- Benoni
- Kempton Park
- Alberton
- Vanderbijlpark
- Vereeniging
- Durban
- Pinetown
- Pietermaritzburg
- Richards Bay
- Newcastle
- Ladysmith
- Gqeberha (Port Elizabeth)
- East London
- Kariega (Uitenhage)
- Mthatha
- Cape Town
- Bellville
- Paarl
- Stellenbosch
- George
- Worcester
- eMalahleni (Witbank)
- Middelburg
- Secunda
- Mbombela (Nelspruit)
- Rustenburg
- Brits
- Klerksdorp
- Potchefstroom
- Mahikeng
- Polokwane
- Tzaneen
- Kimberley
- Upington
- Bloemfontein
- Welkom
- Sasolburg
